snapcraft.yaml 9.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308
  1. name: home-assistant-snap
  2. title: Home assistant
  3. version: '2022.3.8'
  4. icon: snap/gui/home-assistant-snap.svg
  5. summary: Open source home automation that puts local control and privacy first
  6. description: |
  7. Home Assistant is a free and open-source software for home automation that is designed to be the central control system for smart home devices with focus on local control and privacy.
  8. It can be accessed via a web-based user interface, via companion apps for Android and iOS, or using voice commands via a supported virtual assistant like Google Assistant or Amazon Alexa.
  9. Home Assistant integrates with over a thousand different devices and services.
  10. Read more about Home Assistant at
  11. - https://en.wikipedia.org/wiki/Home_Assistant
  12. - https://www.home-assistant.io/
  13. **NOTE!** This is Home Assistant Core (not Supervised).
  14. Your new installation will be available through your browser at http://localhost:8123/ (or any other IP address where this packages is installed). You will get a launcher available in your application menu on desktops.
  15. **Important information about updates**
  16. Each major versions of Home Assistant might bring breaking changes so you will **only** auto-update for minor releases. Each major release must be upgraded manually by switching channel.
  17. See available channels in the software center or with
  18. `snap info home-assistant-snap`
  19. Please use the stable versions, e.g `2021.8/stable`.
  20. You can switch channel with:
  21. ```
  22. $ snap switch home-assistant-snap --channel=<channel>
  23. ```
  24. where `<channel>` could be `2021.8/stable`.
  25. There is a binary sensor `binary_sensor.updater` that will flip to `true` whenever there are updates available in a newer channel. Use this to show a notification whenever a new major release is available.
  26. **Need help?**
  27. Please use https://www.home-assistant.io/docs/ for documentation and https://community.home-assistant.io for help.
  28. **Necessary plugs**
  29. See `snap connections home-assistant-snap` for necessary plugs (such as access to USB, removable media etc) and connect them with
  30. `$ snap connect home-assistant-snap:<plug>`
  31. where `<plug>` can be in example `raw-usb` (needed for Zigbee, Z-wave and other USB dongles).
  32. **Required plugs**
  33. - *network-control:* enables the configuration of networking and network namespaces via `ip netns`, providing a wide, privileged access to networking. This is required for the DHCP discovery integration to work which will watch the network for DHCP requests for supported devices and services. To disable this feature you will have to disable the `default_config` from you `configuration.yaml` and disconnect the `network-control` plug with `snap disconnect home-assistant-snap:network-control`.
  34. **NOTE!** Removing the `default_config` will require you to build up a whole new configuration for Home Assistant. More on what is enabled by default at this link: https://www.home-assistant.io/integrations/default_config/
  35. **Optional plugs**
  36. - *raw-usb:* allows access to all connected USB devices via a raw interface.
  37. - *removable-media*: allows read/write access to mounted removable storage in /media, /run/media and /mnt.
  38. - *serial-port*: enables access to a specific serial port. This interface is restricted because it provides privileged access to configure serial port hardware. Might require hot-plug support `snap set system experimental.hotplug=true` followed by `systemctl restart snapd`.
  39. - *hardware-observe*: required to use the `usb` discovery component.
  40. **Available slots**
  41. - *components:* Load custom components to Home Assistant. You will find the Home Assistant Community Store package here: https://snapcraft.io/home-assistant-hacs - Installations on own risk and note that provided integrations are not tested or guaranteed to work.
  42. - *bin:* Missing binaries might be in the Home Assistant Toolbox, such as cURL etc. See https://snapcraft.io/home-assistant-toolbox
  43. - *configurations:* Edit your configuration files with `code-server` (VS Code) or HASS configurator:
  44. - https://snapcraft.io/code-server
  45. - https://snapcraft.io/home-assistant-configurator.
  46. # source-code: "https://github.com/home-assistant-snap/home-assistant-snap"
  47. # website: "https://github.com/home-assistant-snap/home-assistant-snap"
  48. # issues: "https://github.com/home-assistant-snap/home-assistant-snap/issues"
  49. # donation: "https://www.paypal.com/donate/?hosted_button_id=69NA8SXXFBDBN"
  50. license: Apache-2.0
  51. base: core20
  52. grade: stable
  53. confinement: strict
  54. architectures:
  55. - build-on: amd64
  56. - build-on: arm64
  57. - build-on: armhf
  58. - build-on: ppc64el
  59. layout:
  60. /usr/local/lib:
  61. bind: $SNAP/usr/lib/${SNAPCRAFT_ARCH_TRIPLET}
  62. /etc/pip.conf:
  63. bind-file: $SNAP_COMMON/pip.conf
  64. /etc/openzwave:
  65. bind: $SNAP/openzwave
  66. /etc/ethertypes:
  67. bind-file: $SNAP/etc/ethertypes
  68. /etc/protocols:
  69. bind-file: $SNAP/etc/protocols
  70. /etc/services:
  71. bind-file: $SNAP/etc/services
  72. plugs:
  73. bin:
  74. interface: content
  75. content: executables
  76. target: $SNAP/shared-bin
  77. slots:
  78. components:
  79. interface: content
  80. content: components
  81. write:
  82. - $SNAP_DATA/custom_components
  83. # read:
  84. # - $SNAP_DATA/home-assistant.log
  85. configurations:
  86. interface: content
  87. write:
  88. - $SNAP_DATA
  89. vscs-content:
  90. interface: content
  91. write:
  92. - $SNAP_DATA
  93. apps:
  94. home-assistant-snap:
  95. command: bin/hass --config $SNAP_DATA
  96. command-chain:
  97. - bin/plug-bin
  98. daemon: simple
  99. environment:
  100. PIP_USER: 1
  101. #PYTHONPATH: "$PYTHONPATH:$SNAP/lib/python3.9/site-packages"
  102. restart-condition: always
  103. plugs:
  104. - bluez
  105. - network
  106. - network-bind
  107. - network-control
  108. - hardware-observe
  109. - raw-usb
  110. - serial-port
  111. - physical-memory-control
  112. - removable-media
  113. slots:
  114. - components
  115. open-localhost:
  116. command: bin/open-localhost
  117. plugs:
  118. - desktop
  119. check-config:
  120. plugs:
  121. - network
  122. environment:
  123. PIP_USER: 1
  124. command: bin/hass --script check_config --config $SNAP_DATA -i
  125. # package-repositories:
  126. # - type: apt
  127. # ppa: deadsnakes/ppa
  128. parts:
  129. python:
  130. plugin: autotools
  131. source: https://www.python.org/ftp/python/3.9.8/Python-3.9.8.tgz
  132. autotools-configure-parameters:
  133. - --enable-optimizations
  134. build-packages:
  135. - build-essential
  136. - gdb
  137. - lcov
  138. - pkg-config
  139. - libbz2-dev
  140. - libffi-dev
  141. - libgdbm-dev
  142. - libgdbm-compat-dev
  143. - liblzma-dev
  144. - libncurses5-dev
  145. - libreadline6-dev
  146. - libsqlite3-dev
  147. - libssl-dev
  148. - lzma
  149. - lzma-dev
  150. - tk-dev
  151. - uuid-dev
  152. - zlib1g-dev
  153. override-stage: |
  154. snapcraftctl stage
  155. [ ! -d "${SNAPCRAFT_STAGE}/bin" ] && mkdir ${SNAPCRAFT_STAGE}/bin
  156. ln -s ../usr/local/bin/python3.9 "${SNAPCRAFT_STAGE}/bin/python3.9"
  157. ln -s ../usr/local/bin/python3.9 "${SNAPCRAFT_STAGE}/usr/bin/python3"
  158. stage-packages:
  159. - libfontconfig1
  160. - libfreetype6
  161. - libgdbm-compat4
  162. - libgdbm6
  163. - libpng16-16
  164. - libtcl8.6
  165. - libtk8.6
  166. - libx11-6
  167. - libxau6
  168. - libxcb1
  169. - libxdmcp6
  170. - libxext6
  171. - libxft2
  172. - libxrender1
  173. - libxss1
  174. - bluetooth
  175. - libbluetooth-dev
  176. homeassistant:
  177. after: [python]
  178. plugin: python #-wot-plugin
  179. source: https://github.com/home-assistant/core.git
  180. source-tag: ${SNAPCRAFT_PROJECT_VERSION}
  181. build-environment:
  182. - SNAPCRAFT_PYTHON_INTERPRETER: python3.9
  183. python-packages:
  184. #- setuptools #<58
  185. - wheel
  186. - Cython
  187. #- pip
  188. build-packages:
  189. - autoconf
  190. - build-essential
  191. - cmake
  192. - cython3
  193. - ffmpeg
  194. - libavcodec-dev
  195. - libavdevice-dev
  196. - libavfilter-dev
  197. - libavformat-dev
  198. - libavresample-dev
  199. - libavutil-dev
  200. - libcrypt-dev
  201. - libffi-dev
  202. - libglib2.0-dev
  203. - libglu1-mesa-dev
  204. - libgpiod-dev
  205. - libjpeg-dev
  206. - libopenzwave1.5-dev
  207. - libpcap0.8-dev
  208. - libswresample-dev
  209. - libssl-dev
  210. - libswscale-dev
  211. - libudev-dev
  212. - libxml2-dev
  213. - libxslt1-dev
  214. - pkg-config
  215. # - python3-pip
  216. - python3.9-dev
  217. - zlib1g-dev
  218. - on arm64:
  219. - cargo
  220. - rustc
  221. - on armhf:
  222. - cargo
  223. - gfortran
  224. - rustc
  225. - on ppc64el:
  226. - cargo
  227. - rustc
  228. stage-packages:
  229. - freeglut3
  230. - ffmpeg
  231. - libglu1-mesa
  232. - libpcap0.8
  233. - libpcap0.8-dev
  234. - libpulse0
  235. - libturbojpeg
  236. - netbase
  237. - tcpdump
  238. - zlib1g
  239. stage:
  240. - -lib/python3.9/site-packages/homeassistant/components/updater
  241. - -lib/python3.9/site-packages/aiogithubapi*
  242. requirements:
  243. - requirements_all.txt
  244. constraints:
  245. - homeassistant/package_constraints.txt
  246. override-stage: |
  247. snapcraftctl stage
  248. sed -i 's/include-system-site-packages = false/include-system-site-packages = true/g' $SNAPCRAFT_STAGE/pyvenv.cfg
  249. updater:
  250. after: [homeassistant]
  251. plugin: dump
  252. source: ./src/components
  253. source-type: local
  254. organize:
  255. '*': lib/python3.9/site-packages/homeassistant/components/
  256. bins:
  257. plugin: dump
  258. source: ./src/bin
  259. source-type: local
  260. organize:
  261. open-localhost: bin/open-localhost
  262. hooks:
  263. plugin: dump
  264. source: ./src/hooks
  265. source-type: local
  266. stage-packages:
  267. - uuid
  268. organize:
  269. install: snap/hooks/install
  270. configure: snap/hooks/configure
  271. post-refresh: snap/hooks/post-refresh
  272. connect-plug-bin: snap/hooks/connect-plug-bin
  273. config:
  274. plugin: dump
  275. source: ./src/config
  276. source-type: local
  277. organize:
  278. plug-bin: bin/plug-bin