|
|
@@ -13,41 +13,38 @@ description: |
|
|
|
- https://en.wikipedia.org/wiki/Home_Assistant
|
|
|
- https://www.home-assistant.io/
|
|
|
|
|
|
- **NOTE!** This is Home Assistant Core (not supervised).
|
|
|
+ **NOTE!** This is Home Assistant Core (not Supervised).
|
|
|
|
|
|
- Your new installation will be available through your browser at http://localhost:8123/ (or change localhost to any other IP address where the snap packages is installed). You will get a launcher available in your application menu on desktops.
|
|
|
+ Your new installation will be available through your browser at http://localhost:8123/ (or any other IP address where this packages is installed). You will get a launcher available in your application menu on desktops.
|
|
|
|
|
|
**Important information about updates**
|
|
|
|
|
|
- Since each major versions of Home Assistant might bring breaking changes, you will **only** auto-update for minor releases. Each major release must be upgraded manually, by switching channel.
|
|
|
+ Each major versions of Home Assistant might bring breaking changes so you will **only** auto-update for minor releases. Each major release must be upgraded manually by switching channel.
|
|
|
|
|
|
See available channels in the software center or with
|
|
|
`snap info home-assistant-snap`
|
|
|
Please use the stable versions, e.g `2021.8/stable`.
|
|
|
|
|
|
You can switch channel with:
|
|
|
-
|
|
|
- `
|
|
|
+ ```
|
|
|
$ snap switch home-assistant-snap --channel=<channel>
|
|
|
- `
|
|
|
+ ```
|
|
|
|
|
|
where `<channel>` could be `2021.8/stable`.
|
|
|
|
|
|
- There is a binary sensor `binary_sensor.updater` that will flip to `true` from `false` whenever there are updates available in a newer channel. Use this to show a notification whenever a new major release is available.
|
|
|
+ There is a binary sensor `binary_sensor.updater` that will flip to `true` whenever there are updates available in a newer channel. Use this to show a notification whenever a new major release is available.
|
|
|
|
|
|
**Need help?**
|
|
|
|
|
|
- Please use https://www.home-assistant.io/docs/ for documentation and https://community.home-assistant.io for help from the community.
|
|
|
+ Please use https://www.home-assistant.io/docs/ for documentation and https://community.home-assistant.io for help.
|
|
|
|
|
|
**Necessary plugs**
|
|
|
|
|
|
- Can't connect to your USB (e.g Zigbee, Z-wave, removable drive)?
|
|
|
-
|
|
|
See `snap connections home-assistant-snap` for necessary plugs (such as access to USB, removable media etc) and connect them with
|
|
|
|
|
|
`$ snap connect home-assistant-snap:<plug>`
|
|
|
|
|
|
- where `<plug>` can be in example `raw-usb`.
|
|
|
+ where `<plug>` can be in example `raw-usb` (needed for Zigbee, Z-wave and other USB dongles).
|
|
|
|
|
|
**Required plugs**
|
|
|
|
|
|
@@ -61,7 +58,7 @@ description: |
|
|
|
- *raw-usb:* allows access to all connected USB devices via a raw interface.
|
|
|
- *removable-media*: allows read/write access to mounted removable storage in /media, /run/media and /mnt.
|
|
|
- *serial-port*: enables access to a specific serial port. This interface is restricted because it provides privileged access to configure serial port hardware. Might require hot-plug support `snap set system experimental.hotplug=true` followed by `systemctl restart snapd`.
|
|
|
- - *hardware-observe*: required to use the `usb` discovery component
|
|
|
+ - *hardware-observe*: required to use the `usb` discovery component.
|
|
|
|
|
|
**Available slots**
|
|
|
- *components:* Load custom components to Home Assistant. You will find the Home Assistant Community Store package here: https://snapcraft.io/home-assistant-hacs - Installations on own risk and note that provided integrations are not tested or guaranteed to work.
|
